A SERVICE OF

logo

6 - 11
COOL
THERMOSTAT
EAS00464
ASSEMBLING THE THERMOSTAT
ASSEMBLY
1. Install:
thermostat housing
1
thermostat
2
thermostat housing cover
NOTE:
@
Install the thermostat with its breather hole
a
a facing up.
EAS00466
INSTALLING THE THERMOSTAT
ASSEMBLY
1. Lubricate:
O-ring (thermostat assembly and thermo-
stat assembly inlet pipe)
2. Fill:
cooling system
(with the specified amount of the recom-
mended coolant)
Refer to “CHANGING THE COOLANT” in
chapter 3.
Recommended lubricant
LLC
3. Check:
cooling system
Leaks
Repair or replace any faulty part.
4. Measure:
radiator cap opening pressure
Below the specified pressure
Replace
the radiator cap.
Refer to “CHECKING THE RADIATOR”.