A SERVICE OF

logo

5 - 125
ENG
5. Tighten:
balancer shaft 1
NOTE:
Tighten the balancer shaft to the specified
torque by turning it counterclockwise, and then
turn it two scales back on the balancer lever
scale.
T
R
.
.
0.4 Nm (0.04 m · kg)
6. Tighten:
balancer lever bolt 1
balancer shaft pinch bolt 2
NOTE:
Make sure that the balancer shaft does not
rotate.
T
R
.
.
14 Nm (1.4 m · kg)
T
R
.
.
10 Nm (1.0 m · kg)
7. Start the engine and check that there is no
abnormal noise coming from the balancer
gear. If noise is abnormal, adjust the gear
lash by turning the balancer shaft.
NOTE:
With each adjustment, turn the balancer shaft
one scale.
Clockwise Decrease gear lash
Counterclockwise Increase gear lash
BALANCERS