A SERVICE OF

logo

5 - 53
ENG
4. Install:
thrust washer
clutch boss 1
lock washer
clutch boss nut 2
NOTE:
@
While holding the clutch boss with the univer-
sal clutch holder 3, tighten the clutch boss
nut.
5. Bend the lock washer tab along a flat side of
the nut.
Universal clutch holder
90890-04086
New
T
R
.
.
90 Nm (9.0 m · kg)
6. Lubricate:
long clutch push rod 1
ball 2
short clutch push rod 3
(with the recommended lubricant)
Recommended lubricant
Lithium soap base grease
7. Install:
long clutch push rod
ball
short clutch push rod
(along with a new O-ring)
8. Lubricate:
friction plates
clutch plates
(with the recommended lubricant)
Recommended lubricant
Engine oil
CLUTCH