A SERVICE OF

logo

2 - 3
SPEC
ENGINE SPECIFICATIONS
Oil filter
Oil filter type Formed type ----
Bypass valve opening pressure 78.4 ~ 117.6 kPa
(0.78 ~ 1.18 kg/cm
2
, 0.78 ~ 1.18 bar)
----
Oil pump
Oil pump type Trochoid ----
Inner-rotor-to-outer-rotor-tip clearance 0.09 ~ 0.15 mm 0.23 mm
Outer-rotor-to-oil-pump-housing
clearance
0.03 ~ 0.08 mm 0.15 mm
Cooling system
Radiator capacity 3.2 L ----
Radiator cap opening pressure 93.3 ~ 122.7 kPa
(0.93 ~ 1.23 kg/cm
2
,
0.93 ~ 1.23 bar)
----
Valve relief pressure 4.9 kPa (0.05 kg/cm
2
,
0.05 bar) ----
Radiator core
Width 360 mm ----
Height 295.8 mm ----
Depth 27 mm ----
Coolant reservoir
Capacity 0.485 L ----
<From low to full level> 0.15 L ----
Water pump
Water pump type Single-suction centrifugal pump ----
Reduction ratio 75/48 × 25/28 (1.395) ----
Max. impeller shaft tilt ---- 0.15 mm
Starting system type
Electric starter ----
Spark plugs
Model (manufacturer) × quantity CR8E/U24ESR-N (NGK/DENSO) × 4 ----
Spark plug gap 0.7 ~ 0.8 mm ----
Cylinder head
Volume 22.74 ~ 23.34 cm
3
----
Max. warpage ---- 0.1 mm
Item Standard Limit