A SERVICE OF

logo

5 - 101
ENG
4. Lubricate:
piston
piston rings
cylinder
(with the recommended lubricant)
Recommended lubricant
Engine oil
5. Lubricate:
bolt threads
nut seats
(with the recommended lubricant)
Recommended lubricant
Molybdenum disulfide grease
6. Lubricate:
crankshaft pins
big end bearings
connecting rod inner surface
(with the recommended lubricant)
Recommended lubricant
Engine oil
7. Install:
big end bearings
connecting rod assembly 1
(into the cylinder and onto the crankshaft
pin)
connecting rod cap
(onto the crankshaft pin)
NOTE:
@
Align the projections on the big end bearings
with the notches in the connecting rods and
connecting rod caps.
Be sure to reinstall each big end bearing in
its original place.
While compressing the piston rings with pis-
ton ring compressor 2, install the connecting
rod assembly into the cylinder with the other
hand.
CONNECTING RODS AND PISTONS