A SERVICE OF

logo

5 - 103
ENG
WARNING
When the nuts are tightened more than the
specified angle, do not loosen the nut and
then retighten it.
Replace the nut with a new one and per-
form the procedure again.
CAUTION:
Do not use a torque wrench to tighten the
nut to the specified angle.
Tighten the nut until it is at the specified
angle.
NOTE:
When using a hexagonal nut, note that the
angle from one corner to another is 60°.
▲▲▲ ▲▲▲ ▲▲▲ ▲▲▲ ▲▲▲ ▲▲▲ ▲▲▲
CONNECTING RODS AND PISTONS