8 - 19
–+
ELEC
ELECTRIC STARTING SYSTEM
YES
NO
EAS00761
YES
NO
EAS00749
YES
NO
EAS00750
YES
NO
EAS00751
YES
NO
EAS00752
YES
NO
NOTE:
@
When you switch the tester’s positive and
negative probes, the readings in the above
chart will be reversed.
@
• Are the testing readings correct?
Replace the starting
circuit cut-off relay.
6. Starter relay
• Disconnect the starter relay from the cou-
pler.
• Connect the pocket tester (Ω × 1) and bat-
tery (12 V) to the starter relay terminals as
shown.
Battery positive terminal
→
red/white
1
Battery negative terminal
→
blue/white
2
Tester positive probe
→
red
3
Tester negative probe
→
black
4
• Does the starter relay have continuity
between red and black?
Replace the starter
relay.
R
B
R
L
/
WR
/
W
7. Main switch
• Check the main switch for continuity.
Refer to “CHECKING THE SWITCHES”.
• Is the main switch OK?
Replace the main
switch.
8. Engine stop switch
• Check the engine stop switch for continuity.
Refer to “CHECKING THE SWITCHES”.
• Is the engine stop switch OK?
Replace the right
handlebar switch.
9. Neutral switch
• Check the neutral switch for continuity.
Refer to “CHECKING THE SWITCHES”.
• Is the neutral switch OK?
Replace the neutral
switch.
10.Sidestand switch
• Check the sidestand switch for continuity.
Refer to “CHECKING THE SWITCHES”.
• Is the sidestand switch OK?
Replace the side-
stand switch.
