A SERVICE OF

logo

6 - 18
COOL
WATER PUMP
EAS00478
INSTALLING THE WATER PUMP
1. Install:
•O-ring
water pump assembly
1
WARNING
@
Align the slit
a
on the impeller shaft with
the projection
b
on the oil pump shaft.
Lubricate the O-ring with a thin coat of
lithium soap base grease.
New
T
R
.
.
12 Nm (1.2 m · kg)
2. Fill:
cooling system
(with the specified amount of the recom-
mended coolant)
Refer to “CHANGING THE COOLANT” in
chapter 3.
•crankcase
(with the specified amount of the recom-
mended engine oil)
Refer to “CHANGING THE ENGINE OIL” in
chapter 3.
3. Check:
cooling system
Leaks
Repair or replace the faulty part.
4. Measure:
radiator cap opening pressure
Below the specified pressure
Replace
the radiator cap.
Refer to “CHECKING THE RADIATOR”.