A SERVICE OF

logo

4 - 99
CHAS
SHAFT DRIVE
3. Install:
stopper bolt shim(s) 1
stopper bolt 2
ring gear 3
ring gear bearing housing
CAUTION:
@
The stopper bolt has left-hand threads. To
tighten the stopper bolt, turn it counter-
clockwise.
Apply LOCTITE
®
onto the stopper bolt.
@
4. Measure:
ring-gear-to-stopper-bolt clearance
NOTE:
@
If the ring-gear-to-stopper-bolt clearance is out
of specification, repeat the above procedure.
@
T
R
.
.
9 Nm (0.9 m · kg)