A SERVICE OF

logo

3 - 27
CHK
ADJ
CHECKING THE EXHAUST GAS AT IDLE
CHECKING THE EXHAUST GAS AT IDLE
(Measuring the exhaust gas at idle [when air
induction system is operating])
1. Stand the motorcycle on a level surface.
NOTE:
Place the motorcycle on a suitable stand.
Make sure the motorcycle is upright.
2. Remove:
•rider seat
fuel tank
T-bar
Refer to “SEATS AND FUEL TANK”.
3. Install:
pocket tester 1
(onto the engine oil drain bolt)
engine tachometer
(onto the spark plug lead of cylinder #1)
4. Install:
fuel tank
Refer to “SEATS AND FUEL TANK”.
5. Start the engine and warm it up until the
specified oil temperature is reached.
6. Measure:
engine idling speed
Out of specification Adjust.
Refer to “ADJUSTING THE ENGINE
IDLING SPEED”.
Pocket tester
90890-03132
Engine tachometer
90890-06760
Oil temperature
80 ~ 90 °C
Engine idling speed
1,000 ~ 1,100 r/min