A SERVICE OF

logo

5 - 43
ENG
REMOVING THE PICKUP COIL ROTOR
1. Remove:
pickup coil rotor cover 1
NOTE:
@
Loosen each bolt 1/4 of a turn at a time, in
stages and in a crisscross pattern. After all of
the bolts are fully loosened, remove them.
2. Remove:
pickup coil rotor bolt 1
•washer
pickup coil rotor 2
NOTE:
@
While holding the generator rotor 3 with the
sheave holder 4, remove the pickup coil rotor
bolt.
Sheave holder
90890-01701
INSTALLING THE PICKUP COIL ROTOR
1. Install:
pickup coil rotor 1
•washer
pickup coil rotor bolt
NOTE:
@
Align the projection a into the pickup coil rotor
with the groove b into the crankshaft.
PICKUP COIL ROTOR