Filter
Top Products
136
MIDI Implementation
Model: XV-2020
Date: 2002.6.4
Version: 1.00
1. Receive data
■Channel Voice Messages
* Not received in Performance mode when the Receive Switch parameter (Performance
Part) is OFF.
●Note off
Status 2nd byte 3rd byte
8nH kkH vvH
9nH kkH 00H
n = MIDI channel number: 0H - FH (ch.1 - 16)
kk = note number: 00H - 7FH (0 - 127)
vv = note off velocity: 00H - 7FH (0 - 127)
* Not received when the Envelope Mode parameter (Patch Tone and Rhythm Tone) is NO-
SUS.
●Note on
Status 2nd byte 3rd byte
9nH kkH vvH
n = MIDI channel number: 0H - FH (ch.1 - 16)
kk = note number: 00H - 7FH (0 - 127)
vv = note on velocity: 01H - 7FH (1 - 127)
●Polyphonic Key Pressure
Status 2nd byte 3rd byte
AnH kkH vvH
n = MIDI channel number: 0H - FH (ch.1 - 16)
kk = note number: 00H - 7FH (0 - 127)
vv = Polyphonic Key Pressure: 00H - 7FH (0 - 127)
* Not received in Performance mode when the Receive Poly Key Pressure parameter
(Performance MIDI) is OFF.
●Control Change
* If the corresponding Controller number is selected for the Patch Control Source 1, 2, 3 or
4 parameter (Patch Common), the corresponding effect will occur.
* If a Controller number that corresponds to the System Control Source 1, 2, 3 or 4
parameter (System Common) is selected, the specified effect will apply if Patch Control
Source 1, 2, 3 or 4 parameter (Patch Common) is set to SYS-CTRL1, SYS-CTRL2, SYS-
CTRL3 or SYS-CTRL4.
❍Bank Select (Controller number 0, 32)
Status 2nd byte 3rd byte
BnH 00H mmH
BnH 20H llH
n = MIDI channel number: 0H - FH (ch.1 - 16)
mm, ll = Bank number: 00 00H - 7F 7FH (bank.1 - bank.16384)
* Not received in Performance mode when the Receive Bank Select (Performance MIDI) is
OFF.
* The Performances, Patches, and Rhythms corresponding to each Bank Select are as
follows.
* The SRX series corresponding to each Bank Select are to see the SRX series owner’s
manual.
+—————+———————————+———————————+——————————————————————+———————————+
| BANK SELECT | PROGRAM | GROUP | NUMBER |
| MSB | LSB | NUMBER | | |
+—————+———————————+———————————+——————————————————————+———————————+
| 085 | 000 | 001 — 064 | User Performance | 001 — 064 |
| | 064 | 001 — 032 | Preset Performance A | 001 — 032 |
| | 065 | 001 — 032 | Preset Performance B | 001 — 032 |
| | : | | : | |
| 086 | 000 | 001 — 004 | User Rhythm | 001 — 004 |
| | 064 | 001 — 002 | Preset Rhythm A | 001 — 004 |
| | 065 | 001 — 002 | Preset Rhythm B | 001 — 004 |
| | : | | : | |
| 087 | 000 | 001 — 128 | User Patch | 001 — 128 |
| | 064 | 001 — 128 | Preset Patch A | 001 — 128 |
| | 065 | 001 — 128 | Preset Patch B | 001 — 128 |
| | : | | : | |
| 092 | 000 — | 001 — | SRX Rhythm | 001 — |
| | : | | : | |
| 093 | 000 — | 001 — | SRX Patch | 001 — |
| | : | | : | |
| 120 | | 001 — 057 | GM Rhythm | 001 — 009 |
| 121 | 000 — | 001 — 128 | GM Patch | 001 — 256 |
+—————+———————————+———————————+——————————————————————+———————————+
❍Modulation (Controller number 1)
Status 2nd byte 3rd byte
BnH 01H vvH
n = MIDI channel number: 0H - FH (ch.1 - 16)
vv = Modulation depth: 00H - 7FH (0 - 127)
*Not received in Performance mode when the Receive Modulation parameter
(Performance MIDI) is OFF.
❍Breath type (Controller number 2)
Status 2nd byte 3rd byte
BnH 02H vvH
n = MIDI channel number: 0H - FH (ch.1 - 16)
vv = Control value: 00H - 7FH (0 - 127)
❍Foot type (Controller number 4)
Status 2nd byte 3rd byte
BnH 04H vvH
n = MIDI channel number: 0H - FH (ch.1 - 16)
vv = Control value: 00H - 7FH (0 - 127)
❍Portamento Time (Controller number 5)
Status 2nd byte 3rd byte
BnH 05H vvH
n = MIDI channel number: 0H - FH (ch.1 - 16)
vv = Portamento Time: 00H - 7FH (0 - 127)
* In Performance mode the Part Portament Time parameter (Performance Part) will
change.
❍Data Entry (Controller number 6, 38)
Status 2nd byte 3rd byte
BnH 06H mmH
BnH 26H llH
n = MIDI channel number: 0H - FH (ch.1 - 16)
mm, ll = the value of the parameter specified by RPN/NRPN
mm = MSB, ll = LSB
❍Volume (Controller number 7)
Status 2nd byte 3rd byte
BnH 07H vvH
n = MIDI channel number: 0H - FH (ch.1 - 16)
vv = Volume: 00H - 7FH (0 - 127)
*Not received in Performance mode when the Receive Volume parameter (Performance
MIDI) is OFF.
* In Performance mode the Part Level parameter (Performance Part) will change.
❍Balance (Controller number 8)
Status 2nd byte 3rd byte
BnH 08H vvH
n = MIDI channel number: 0H - FH (ch.1 - 16)
vv = Balance: 00H - 7FH (0 - 127)
❍Panpot (Controller number 10)
Status 2nd byte 3rd byte
BnH 0AH vvH
n = MIDI channel number: 0H - FH (ch.1 - 16)
vv = Panpot: 00H - 40H - 7FH (Left - Center - Right),
*Not received in Performance mode when the Receive Pan parameter (Performance
MIDI) is OFF.
* In Performance mode the Part Pan parameter (Performance Part) will change.
❍Expression (Controller number 11)
Status 2nd byte 3rd byte
BnH 0BH vvH
n = MIDI channel number: 0H - FH (ch.1 - 16)
vv = Expression: 00H - 7FH (0 - 127)
*Not received when Tone Receive Expression parameter (Patch Tone or Rhythm Tone) is
OFF.
*Not received in Performance mode when Receive Expression parameter (Performance
MIDI) is OFF.