Filter
Top Products
92
Saving a Sound You Create
Saving Edits to the XV-2020’s
Internal Memory (WRITE)
If you turn the power off or select another Patch, Rhythm Set, or
Performance after you have modified a Patch, Rhythm Set or
Performance, the changes you have made will be lost. If you wish to
preserve the data, store it into the XV-2020’s USER memory.
Saving a Patch/Rhythm Set/
Performance
Saving from the XV-2020
1. Make sure that the Patch (Rhythm Set/Performance) you
wish to save is selected.
2. While holding down [VOLUME], press [VALUE].
3. Turn [CATEGORY/BANK] to select “UTILITY (PIANO).”
4. Rotate [VALUE] until “wrt ( )” appears in the display.
5. Press [VALUE] to display the write-destination Patch
(Rhythm Set/Performance) number.
6. Rotate [VALUE] to select the write-destination Patch
(Rhythm Set/Performance) number.
7. When you press [VALUE], “Sur” flashes in the display, and
a screen asking you to confirm whether or not you want to
save appears.
8. Press [VALUE] to save the Patch.
* To cancel the procedure, while holding down [VOLUME] and
pressing [VALUE].
* When you save a Performance, only the Performance settings are
saved. Settings for the Patches and Rhythm Sets assigned to Parts are
not saved, even when these are changed.
* You cannot save GM Bank Patch and Rhythm Set settings.
Saving with the Included XV Editor
When using XV Editor, included with the XV-2020, you can click
“WRITE” to save data.
fig.07-01
* To load saved Patches (Rhythm Sets/Performances), click “READ.”
Initializing a Sound
(INITIALIZE)
This feature resets all of the parameters in the current Patch,
Performance, Rhythm Set or Rhythm Tone to their standard
(INITIALIZE).
* When you play a Patch, Performance, Rhythm Set or Rhythm Tone,
you’re actually playing it from the XV-2020’s Temporary memory —
the Patch, Performance, Rhythm Set or Rhythm Tone is instantly
copied into the Temporary memory when you select it. During
initialization, only the copy is affected, not the version saved in
memory. If you wish to restore all of the XV-2020’s settings to their
factory values, perform a Factory Reset. (p. 12)
1. Select the Performance, Patch or Rhythm Set you wish to
initialize.
2. While holding down [VOLUME], press [VALUE].
3. Turn [CATEGORY/BANK] to select “UTILITY (PIANO).”
4. Rotate [VALUE] until “ini ( )” appears in the display.
5. When you press [VALUE], “Sur” flashes in the display, and
a screen asking you to confirm whether or not you want to
save appears.
6. When you press [VALUE] once more, the sound is
initialized.
* To cancel the procedure, hold down [VOLUME] while you press
[VALUE].
Never turn off the power to the XV-2020 while data is being
saved