Filter
Top Products
93
COUNTER
Reference
SYSTEM /
USB
RECORDTRACKSONG /
CD
STOREMARKSCENETEMPO /
RHYTHM
IN / LOC1...
END / LOC4
AUTO
PUNCH
LOOPUNDOTRIGGERSCRUBENTERINPUT /
TUNER
EQ /
PHASE
INSERT
FX
MASTER
FX / AUX
SOLO /
MONITOR
METER /
Tr VIEW
Tr STATUSPANFADER
TRANSPORT
P4 MMC: MMC settings
The D1600mkII transmits and receives MMC (MIDI Machine
Control) messages.
When synchronizing two D1600mkII units, or when using
the D1600mkII together with an MMC-compatible MIDI
sequencer, you can playback, stop, or fast-forward etc. by
operating only the master device.
Some MIDI devices may not respond to the MMC func-
tionality of the D1600mkII. Details on the MMC func-
tionality of the D1600mkII are given in the MIDI
implementation.
1. Select MMC Mode ...................[Transmit, Receive, Off]
Turn MMC transmission or reception on/off.
Transmit: MMC will be transmitted.
Receive: MMC will be received.
Off: MMC will not be used.
2. MMCDevID (MMC Device ID)......................[000...127]
Specify the device ID that will be used when transmit-
ting/receiving MMC.
To enable MMC transmission/reception, connect the
external MIDI device to the D1600mkII via MIDI, set the
device ID to match, and set “Select MMC Mode” appro-
priately.
If this parameter is set to “127,” MMC can be trans-
mitted/received to/from all ID numbers.
P5 B-U/Rst: Backup/restore using a
removable disc
Here you can backup (save) and restore (load) data to and
from a removable disc such as CD-R or CD-RW.
You can restore the following data.
• D1600mkII backup data
• D12 backup data
• D16 backup data
• D1200 backup data
• D1200mkII backup data
For details on data compatibility, refer to p.81
When backing up to CD-R/RW, you cannot save more
than one backup on a single disc.
1. B-U/RstType..............[Backup1Song, BackupAllSongs,
BackupUserData, Restore]
Selects the type of backup or restore operation.
You can press the “ ” button and make your selection in
the following dialog box.
Details of each operation you can select here are
explained below.
B-U/Rst Type: Backup 1 Song
This operation backs-up the selected song and the effect user
data.
2. Source......................................................(001...100)
Indicates the backup-source song number. This is the
song number of the song you selected in the [SONG/
CD] “SelSong” tab page.
3. Drive ............................................................ [S, C, U]
Selects the backup-destination drive. The drive ID, drive
information (type and capacity), and format type is dis-
played.
For this operation you can select either “C” or “U”.
S:HDD: The song drive of the hard disk. You can’t select
this here.
C:CD: The CD-R/RW drive.
U:USB DOS: The USB drive of the hard disk.
3a. Format Type..............................(B, D16[B], Audio)
Shows the format type of the CD-R/RW disc.
[B] (Backup Type): D1600mkII or D16/D1600 backup
CD
D12[B]: D12, D1200, or D1200mkII backup CD
Audio: audio CD
If the disc is blank, the format type will not be
displayed.
4. Destination........... (C, U:CDx01...99, SONG001...100)
Shows the backup-destination drive and drive informa-
tion (C:CD x the number of discs required, or U:song
name).
When backing up to CD-R or CD-RW, you must use
blank discs.
1
2
1
3
6
2 4 5
3a
SYSTEM /
USB