Filter
Top Products
109
COUNTER
Reference
SYSTEM /
USB
RECORDTRACKSONG /
CD
STOREMARKSCENETEMPO /
RHYTHM
IN / LOC1...
END / LOC4
AUTO
PUNCH
LOOPUNDOTRIGGERSCRUBENTERINPUT /
TUNER
EQ /
PHASE
INSERT
FX
MASTER
FX / AUX
SOLO /
MONITOR
METER /
Tr VIEW
Tr STATUSPANFADER
TRANSPORT
4. New..........................................................................
This creates a new song following the last song of the
currently selected drive.
Press the “New” button to access the dialog box.
Set “SongType” and “MixerSet,” and press the “OK”
button, to create the new song. If you press the “Cancel”
button, no song will be created.
4a. SongType................[16Bit/16Track, 24Bit/8Track]
16Bit/16Track: Create a song for 16-bit recording/play-
back. Tracks 1–16 can be used. A maximum of eight
tracks can be recorded simultaneously.
24Bit/8Track: Create a song for 24-bit recording/play-
back. Tracks 1–8 can be used. Tracks 9–16 are not availa-
ble. A maximum of four tracks can be recorded
simultaneously.
When audio data is transferred to a 16-bit song, it
will be handled as 16-bit data. For details, refer to
“Edit Type: Copy Track” (→p.100).
The “SongType” (Bit/Track) setting can be changed
only when creating a new song.
4b. MixerSet.....................................[New, PrevSong]
Select the mixer settings for the new song.
New: New settings will be used.
PrevSong: The mixer settings of the currently selected
song will be used.
P2 EditSong: Song editing
Your editing will affect the currently selected song.
You cannot Undo the results of these editing operations.
1. EditType ...............[CopySong, MoveSong, DeleteSong,
ProtectSong]
Selects the type of editing operation.
You can press the “ ” button and make your selection
from a dialog box.
Details of each operation you can select here are
explained below.
Edit Type: Copy Song
This operation copies the selected song to the desired song
number.
2. SourceSong...............................................(001...100)
Shows the copy-source song number. To change this,
make your selection in the [SONG/CD] “SelSong” tab
page.
3. DestSong ..................................................[001...100]
Selects the copy-destination song number.
The available numbers will be “001”–“existing song
number +1”.
4. Exec. (Execute)
Executes the copy operation.
When you execute, the song will be copied to the copy-
destination song number (“DestSong
”). If “DestSong” is
an existing song number, that song and subsequent
songs will be renumbered upward by one; no songs will
be overwritten.
You cannot Undo this operation.
Edit Type: Move Song
This operation moves the selected song to a different song
number.
2. SourceSong...............................................(001...100)
Shows the move-source song number. To change this,
make your selection in the [SONG/CD] “SelSong” tab
page.
3. DestSong ..................................................[001...100]
Selects the copy-destination song number.
The available numbers will be “001”–“existing song
number.”
4. Exec. (Execute)
Executes the Move Song operation.
If the move-destination number (“DestSong
”) is higher
than the move-source number (“Sour
ceSong”), the song
at the “DestSong
” number and subsequent songs will be
moved forward; if the move-destination number is
lower, these songs will be moved backward. No songs
will be overwritten.
You cannot Undo this operation.
4b4a
1
2 3
4
4
32
SONG /
CD