Filter
Top Products
118
You can store the desired time locations in [IN/LOC1],
[OUT/LOC2], [TO/LOC3], and [END/LOC4], and use
these keys in the following ways.
• Locate points (press a key to move to the stored location)
• Loop playback in/out points
• Auto-punch recording in/out points
•Track editing points
• In-Out playback
In-Out Playback is a function that lets you hold down the
[IN/LOC1] key and press the [OUT/LOC2] key to play
from the IN time stored in the [IN/LOC1] key to the OUT
time stored in the [OUT/LOC2] key. This is a convenient
way to play back the IN–OUT region of the song so you can
check the contents.
For details on how to store a location in each key, refer to
“Using the locate keys to move” (→p.46).
Locate functions
[IN/LOC1] key
The time location stored in the [IN/LOC1] key is used in the
following ways.
• Locate point 1
• Punch-in time for auto punch-recording
• Playback start time for loop playback
• Playback start time for in-out playback
• The following time locations for track editing operations
“CopyTrack” copy source start time
“InsertTrack” blank insertion start time
“EraseTrack” erase region start time
“DeleteTrack” delete region start time
“SwapTrack” swap-source and swap-destination
start times
“ReverseTrack” reverse-source start time
“Exp/CompTrack” expansion/compression-source
start time
“OptimizeTrack” start time
“FadeTrack” start time
“NormalizeTrack” start time
[OUT/LOC2] key
The time location stored in the [OUT/LOC2] key is used in
the following ways.
• Locate point 2
• Punch-out time for auto punch-recording
• Playback end time for loop playback
• Playback end time for in-out playback
• The following time locations for track editing operations
“CopyTrack” copy source end time
“InsertTrack” blank insertion end time
“EraseTrack” erase region end time
“DeleteTrack” delete region end time
“SwapTrack” swap-source and swap-destination end
times
“ReverseTrack” reverse-source end time
“Exp/CompTrack” expansion/compression-source
end time
“OptimizeTrack” end time
“FadeTrack” end time
“NormalizeTrack” end time
[TO/LOC3] key
The time location stored in the [TO/LOC3] key is used in the
following ways.
• Locate point 3
• The following time locations for track editing operations
“CopyTrack” copy-destination time
“ReverseTrack” reverse copy destination time
“Exp/CompTrack” expansion/compression-
destination start time + copy-destination time
[END/LOC4] key
The time location stored in the [END/LOC4] key is used in
the following ways.
• Locate point 4
• The following time location for track editing operations
“Exp/CompTrack” expansion/compression-
destination end time
10. IN/LOC1, OUT/LOC2,
TO/LOC3, END/LOC4