Filter
Top Products
71
Creating/
selecting a song
Assign audio inputs
to the mixer
Basic
operation
RecordingPlayback
Changing the
time location
Using the
mixer
Using
effects
MixdownTrack
editing
Song
editing
Rhythm/tempo
settings
DataDriveUSBUpdating
the system
MIDI
3. Make sure that the song you want to protect is
selected as the “DestSong”.
4. Turn the protect setting on or off.
Press the “Exec.” button. A lock symbol is displayed
to indicate a song for which Protect is turned on. The
setting will alternate on/off each time you press the
“Exec.” button.
The D1600mkII contains numerous rhythm patterns for a
variety of time signatures (→p.168 “Rhythm Pattern
List”).
When you have a sudden idea for a song, you can record
your performance immediately, using the built-in
rhythms as a guide.
By joining various rhythm patterns, you can also create
drum patterns for an entire song.
1. Specifying and playing a
rhythm
Access the [TEMPO/RHYTHM] “SetUp” tab page.
The settings described below are made in this page.
Turning the rhythm on/off
Press the “Rhythm” button to turn it “On” (high-
lighted).
The [TEMPO/RHYTHM] key will light, and the
rhythm will sound during playback or recording.
If you do not want to hear the rhythm during play-
back or recording, turn the “Rhythm” button “Off.”
Adjusting the rhythm volume
Select the “RhythmVol (Vol),” and rotate the
[VALUE] dial to adjust the volume.
Setting the tempo and time signature
1. Select the “TempoSource,” and select the tempo
source.
For this example, we will select “Manual” which will
use a single tempo, time signature, and rhythm pat-
tern.
You can also press the “ ” button, and select
from a list.
If you wish to change the tempo, time signature, and
rhythm pattern during the song, you must create a
Tempo Map. (→p.72)
2. Select the “T
empo,” and rotate the [VALUE] dial to
adjust the tempo.
3. Select the “Beat
,” and rotate the [VALUE] dial to set
the time signature.
Rhythm/tempo settings
Rhythm/tempo
settings