Filter
Top Products
16
Pre-fader level display
2. Press the [METER/TRACK VIEW] key. From the screen that appears,
press the “ ” button to open the dialog box.
3. From the Select DisplayMode dialog box, press the “PreFaderLev”
radio button and press the “OK” button; the pre-fader screen will
appear.
The ch.8 level meter will move when you play your guitar.
4. While watching the level meter, adjust the INPUT 8 [TRIM] knob so
that the level meter goes as high as possible without reaching “CLP”
when you play your guitar most loudly.
Use the [TRIM] knob to set the input level so that the peak indicator
(the LED near the [TRIM] knob) lights when the volume is loudest.
7. Check the sound
Make settings so that you can hear the sound through your headphones
or monitor speakers.
1. Raise the front panel [CHANNEL 8] fader to unity gain (0 dB).
2. Press the [SOLO/MONITOR] key to access the [SOLO/MONITOR]
“Monitor” tab page.
3. Press the “MasterLR” button to select “ ”.
4. While you play your guitar, gradually raise the [MASTER] fader.
You will hear the sound of the guitar from your headphones or mon-
itor speakers.
8. Record
Next you will record your guitar performance on track 8 while watching
the status of the recording track on the track view screen.
Let’s start by recording a backing guitar part.
[TRACK STATUS] key setting
Specify the track on which you will record.
1. Press the front panel track 8 [TRACK STATUS] key to choose REC
(LED lit red).