Strahl D1600mkII Musical Instrument User Manual


 
162
Operating temperature range:
Specifications
<Recorder section>
< MIDI functionality >
<Mixer section>
<Effect section>
<General>
Principal specifications
Analog/digital input and output specifications
<INPUT1, 2, 3, 4>
<INPUT5, 6, 7, 8>
<GUITAR INPUT>
<MASTER OUTPUT L/R>
<MONITOR OUTPUT L/R>
+5 – +35 °C (do not allow condensation)
Number of tracks: 128 tracks (including virtual tracks)
16 tracks simultaneous playback, 8
tracks simultaneous recording @ 16 bits
8 tracks simultaneous playback, 4 tracks
simultaneous recording @ 24 bits
Recording format: 24 bit/16 bit uncompressed, 44.1 kHz
Recording time: 16 bit recording: maximum 122 hours
24 bit recording: maximum 61 hours
Storage capacity:
40 GB hard disk (however, 2 GB is used
as a USB drive)
Number of songs: 100 songs per drive
Locate points: four points per song
Mark points: 100 points per song
(marks can be named)
Metronome patterns: 96
Rhythms: 215
MMC functions: Transmitted and received
Synchronization: MTC transmission/reception, MIDI
Clock transmission
Tempo map (200 points per song)
Sync track (1 track per song)
Tempo rec
CD-R/RW functional-
ity:
Audio CD writing (Disc At Once/Track
At Once), backup/restore, WAV file
export/import (ISO9660)
USB functionality: Backup/restore (FAT16), WAV file
import (FAT16)/export (FAT16)
Track editing: Copy, insert, erase, delete, swap,
reverse, time expansion/compression,
fade, normalize, optimize (tracks can be
copied between songs)
Song editing: Copy, move, delete, rename, protect
Counter/locate format: Min/Sec/mSec, Meas/Beat/Tick, Min/
Sec/Frame (30NDF only)
MIDI functionality: Mixer control, effect control,
MMC transmission/reception,
MTC transmission/reception,
MIDI Clock transmission
Structure: 24 channel input, 8 BUS, 1 AUX,
1 MASTER
Signal processing: 32 bit 44.1 kHz
Equalizer: HIGH (f:10 kHz G:±15 dB)
MID (f:0.1 –20 kHz G:±15 dB)
LOW (f:100 Hz G:±15 dB)
Scene memory: 100 scenes per song
Structure: insert × 8 (maximum)
master × 2 (maximum)
final × 1
All usable simultaneously
Signal processing: 44 bit 44.1 kHz
Programs: insert (128 preset, 128 user)
master (32 preset, 32 user)
final (32 preset, 32 user)
Algorithms: 98
Effects: 106
Specifications
Display: 240 × 64 pixel
LCD with backlight and touch panel
Power supply: AC Local Voltage
Power consumption: 40 W
Dimensions: 510 (W) × 383 (D) × 138 (H) mm/
20.08" (W) × 15.08" (D) × 5.43" (H)
(incluting protrusions)
Weight: 7.8 kg/17.20 lbs.
Frequency response: 10 Hz –20 kHz ±1dB @+4 dBu, 10 k
load
S/N: 96 dB (typical) @IHF-A
Dynamic range: 96 dB (typical) @IHF-A
THD+N: 0.02 % (typical) 20 Hz –20 kHz @+16
dBu, 10 k load
A/D conversion: 24 bit, 64 times oversampling
D/A conversion: 24 bit, 128 times oversampling
Sampling frequency: 44.1 kHz
Connectors: XLR-3-31 type (+48V phantom power,
SW), 1/4" TRS phone jack (balanced)
Input impedance: 4 k/XLR-3-31, 10 k/TRS phone jack
Nominal level: –60 dBu @TRIM=max.
+4 dBu @TRIM=min.
Maximum level: –48 dBu @TRIM=max.
+16 dBu @TRIM=min.
Source impedance: 600
Connectors: 1/4" TRS phone jack (balanced)
Input impedance: 10 k
Nominal level: –60 dBu @TRIM=max.
+4 dBu @TRIM=min.
Maximum level: –48 dBu @TRIM=max.
+16 dBu @TRIM=min.
Source impedance: 600
Connector: 1/4" phone jack (unbalanced)
Input impedance: 1 M
Nominal level: –60 dBu @TRIM=max.
+4 dBu @TRIM=min.
Maximum level: –48 dBu @TRIM=max.
+16 dBu @TRIM=min.
Source impedance: 600
Connector: 1/4" phone jack (unbalanced)
Output impedance: 150
Nominal level: –10 dBu
Maximum level: +2 dBu
Load impedance: 10 k or more
Connector: 1/4" phone jack (unbalanced)
Output impedance: 150 or more
Nominal level: –10 dBu
Maximum level: +2 dBu
Load impedance: 10 k or more