Filter
Top Products
97
COUNTER
Reference
SYSTEM /
USB
RECORDTRACKSONG /
CD
STOREMARKSCENETEMPO /
RHYTHM
IN / LOC1...
END / LOC4
AUTO
PUNCH
LOOPUNDOTRIGGERSCRUBENTERINPUT /
TUNER
EQ /
PHASE
INSERT
FX
MASTER
FX / AUX
SOLO /
MONITOR
METER /
Tr VIEW
Tr STATUSPANFADER
TRANSPORT
1. Exec. (Execute) ...........................................................
Executes the check drive operation.
1a. Area.................................. [Unused, Full, CurSng]
Specifies the area that will be checked.
Unused: Of the unused area, the first 2 GB of the area to
be used next will be checked and repaired.
Full: The entire area of the drive will be checked and
repaired.
CurSong: The area used by the currently selected song
will be checked and repaired.
Press the “Yes” button to begin checking the drive.
The Check Drive operation requires a substantial
amount of time for execution.
When “Area” is “Full”: approximately 4 hours and
30 minutes
When “Area” is “Unused”: approximately 25
minutes
If “DiskBusy” messages appear even after you
execute Check Drive, you will need to optimize the
track data. ([TRACK] “EditTrk” tab page, “Optimize
Track”)
Very low frequency vibration in a studio etc. may
cause “DiskBusy” errors to appear. In this case, cor-
rect the problem by moving the D1600mkII to a dif-
ferent location before you execute Check Drive.
Sel Operation: Erase CD-RW
This operation erases the data from a CD-RW. When a CD-
RW has been erased, you will once again be able to use its full
capacity as a blank disc.
All data on that disc will be erased when you execute
“EraseCD-RW”.
You cannot execute “EraseCD-RW” on a disc other than
a CD-RW.
1. Exec. (Execute) ...........................................................
Erases the data from the CD-RW disc.
1a. Quick SW .............................................. [On, Off]
Selects the way in which the CD-RW will be erased.
On: The entire CD-RW disc will be erased at
high speed. Since only track information will be erased,
this lets you initialize the disc in a short time. This will
not affect writing.
Off: The entire CD-RW disc will be erased com-
pletely.
Use this setting if the disc is not recognized even after
being erased with “Quick” turned On.
Press the “Yes” button to begin the Erase operation.
Sel Operation: Format/S
This operation formats the song drive of the hard disk.
1. Exec. (Execute) ...........................................................
Executes formatting of the song drive.
1a. Quick SW .............................................. [On, Off]
Selects the type of formatting.
On: Select this if you simply want to erase all the
song data at once. Since this will only initialize the man-
agement area of the drive, it will not require very much
time for execution.
Off: Select this if “DiskError” messages appear
frequently.
Formatting with “Quick” turned off will require a
substantial amount of time.
Song drive (38 GB): approximately 10 hours
2a. Force ..................................................... [On, Off]
Forces formatting to be performed even if the drive con-
tains protected songs.
On: The drive will be formatted even if it con-
tains songs protected by the “ProtectSong” setting.
Off: If the drive contains songs protected by the
“ProtectSong” setting, a message of “SongProtect” will
appear when you execute, and the operation will be
aborted.
Press the “Yes” button to begin formatting.
1a
1
1a
1
1a
2a
SYSTEM /
USB