Filter
Top Products
12
ZOOM B9.1ut
Quick Guide 2 (Edit Mode/Store Mode Operation)
46+!*OVY\Z
+LW[O$l
Editing a patch (edit mode)
HINT
The major parameters of the PRE-AMP/EQ
module can be edited with the knobs of the
pre-amp section, in the same way as in
manual mode or play mode.
NOTE
The changes that you have made to a patch
will be lost when you select another patch. To
keep the changes, store the patch first.
NOTE
[Display in edit mode ]
Effect type name
Parameter value
Parameter number/
Parameter name
Module name
If you press the PRE-AMP/EQ
module key, the display will be
different. For details, see page 24.
The unit switches to edit mode. By repeatedly pressing the effect
module key, the respective module can be toggled between on and off.
1. Press the effect module key for the module to edit.
2. Use the [TYPE] knob and parameter knobs 1 – 4 to make
adjustments.
[TYPE] knob
Changes the effect type.
Parameter knobs 1 – 4
For information on parameters assigned
to the knobs, see page 64 – 79.
Change the respective parameter.
This section explains how to edit a selected patch and how to store the changes you have made.