Filter
Top Products
28
ZOOM B9.1ut
Storing Patches and Banks (Store Mode)
Use the PATCH/BANK [▼]/[▲] foot switches
to select the bank and patch.
PATCH/BANK [▼]/[▲]
foot switches
• When activation sequence was play
modee
→ store mode
• When activation sequence was play
mode
→ edit mode → store mode
Use the PATCH/BANK [
▼]/[▲] foot switches
to select the bank, and then use foot switches
1 –4 to select the patch.
Foot switches 1 – 4
HINT
You can also select the bank number/patch
number with the [TYPE] knob.
Press the [STORE/SWAP] key once
5.
more.
The store/swap process is carried out, and the B9.1ut
then returns to the manual mode or play mode with
the store/swap target patch being selected.
By pressing the [EXIT] key instead of the
[STORE/SWAP] key, you can cancel the process
and return to the previous mode.
NOTE
The Accelerator settings are not stored as part
of the patch.
Storing/swapping
banks
This section explains how to store and swap
entire banks.
In manual mode, play mode, or edit
1.
mode, press the [STORE/SWAP]
key.
The B9.1ut switches to the store standby
condition, and the currently selected bank
becomes the store/swap source.
To store/swap entire banks, turn
2.
parameter knob 2 to bring up the
indication "BANK" in the top right
of the display.
)(52<(w!)(52
:;69,&j<
Store/swap source group name/bank number
Store/swap
target bank number
Store/swap target group
name/bank number
Turn parameter knob 1 to bring
3.
up the indication "STORE?" or
"SWAP?" on the display.
When "STORE?" is selected, the current bank
can be stored as any user bank.
When "SWAP?" is selected, the current user
bank can be swapped with any other user bank.
NOTE
If the source bank is from the preset group, the
indication "SWAP?" does not appear.
Use the PATCH/BANK[
4.
▼]/[▲] foot
switches to select the store/swap
target bank.
Press the [STORE/SWAP] key once
5.
more.
The store/swap process is carried out, and the
B9.1ut then returns to play mode or manual