Filter
Top Products
71
ZOOM B9.1ut
Effect Types and Parameters
Treble
Adjusts the high frequency range.
Presence
Adjusts the very high frequency range.
The above 6 effect types have the same parameters.
PARM1 PARM2 PARM3
Type
Q1, Q2, SH,
HPF, LPF
f
See Table 2
G
-12 – +12
Q1 selects a peaking equalizer with a narrow Q
curve and Q2 selects a peaking equalizer with a
wide Q curve. SH selects a shelving equalizer.
HPF enables a high-pass fi lter and LPF a low-
pass fi lter. Available Type settings depend on
the frequency band (see Table 1).
Selects the frequency to adjust. Sets the gain.
[Table 1] [Table 2]
Band
Available Type settings
Band
Available f settings
Band
Available f settings
Sub-Bass Q1,Q2,SH,HPF Sub-Bass 50 – 120 Hi-Mid 450 – 1.2k
Bass, Lo-Mid, Hi-Mid, Treble Q1,Q2 Bass 120 – 200 Treble 1.0k – 3.6k
Presence Q1,Q2,SH,LPF Lo-Mid 200 – 450 Presence 3.6k – 8.0k
CABINET module
Ths effect simulates the sound of the amp cabinet.
Original 8x10 AG (8x10 Ampeg)
When a preamplifi er is selected for the PRE-AMP module, the original
or a recommended cabinet setting can be selected. When a stomp box
or synthesizer is selected for the PRE-AMP module, or if the PRE-AMP
module is off, "8x10 AG" is selected.
Simulates the Ampeg 810E.
4x12 SB (4x12 Superbass) 4x12 BM (4x12 Bassman)
Simulates the Marshall 1935A. Simulates the Fender Bassman combo amp cabinet.
4x10+1x15 TE (4x10+1x15 Trace Elliot) 4x10 HA (4x10 Hartke)
Simulates the Trace Elliot 1048H/1518. Simulates the Hartke 4.5XL.
4x10 SWR (4x10 SWR) 4x10 AL (4x10 Aguilar)
Simulates the SWR Goliath. Simulates the Aguilar GS410.
4x10 GK (4x10 Gallien Krueger) 2x15 EV (2x15 Electro-Voice)
Simulates the Gallien Krueger 410RBH. Simulates the Electro-Voice B-2150M.
1x18 AC (1x18 Acoustic) 1x15 PT (1x15 Polytone)
Simulates the Acoustic 301. Simulates the Polytone Mini Brute III combo amp cabinet.
1x15 AG (1x15 Ampeg) 1x12 BE (1x12 Bag End)
Simulates the Ampeg B-15R combo amp cabinet. Simulates the Bag End S-12B.
The above 14 effect types have the same parameters.
PARM1
CabMix
2 – 100
Adjusts the mixing ratio between original sound and cabinet sound.
MOD/EFX2 (Modulation/Effects 2) module
This module comprises modulation and delay effects such as chorus, pitch shifter, delay, and echo.
Chorus
This effect mixes a variable pitch-shifted component to the original signal, resulting in full-bodied resonating sound.
PARM1 PARM2 PARM3 PARM4
Depth
0 – 100
Rate
1 – 50
Lo-Cut
Off – 800
Mix
0 – 100
Adjusts the modulation depth. Adjusts the modulation rate.
Specifi es the low-range cutoff point
for the effect sound.
Adjusts the level of the effect sound
mixed to the original sound.