Filter
Top Products
20
ZOOM B9.1ut
Using the Tuner (Bypass/Mute Mode)
Using the chromatic
tuner
To use the chromatic tuner function, proceed as
follows.
In manual mode, play mode, or
1.
edit mode, press and hold the
[BYPASS/TUNER] key.
To use the tuner, the B9.1ut must be set to the
bypass mode (effect sound off) or mute mode
(original sound and effect sound both off).
● To switch to the bypass mode
Briefly press and release the [BYPASS/
TUNER] key so that the key lights up. The
B9.1ut is now in the bypass mode.
)@7(::
HINT
In the default condition, each patch of the
B9.1ut has the bypass on/off switching function
assigned to function foot switch 1.
● To switch to the mute mode
Hold the [BYPASS/TUNER] key until the
indication "BYPASS" changes to "MUTE".
Then release the key. The B9.1ut is now in the
mute mode.
4<;,
Release key when "MUTE" is shown
After "BYPASS" or "MUTE" is shown, the
B9.1ut automatically switches to the tuning
display.
*/964(;*/a
¼
Tuner type Reference pitch
HINT
• In bypass mode, the built-in expression pedal
functions as a volume pedal. (In the mute
mode, the pedal has no effect.)
• By turning the [TYPE] knob, you can switch
between the chromatic tuner and the bass
tuner. For information on the bass tuner, see
the next section.
• The reverse "T" or number indication on the
display indicates that the [TYPE] knob or the
corresponding parameter knob can be used
for adjustment.
Play the open string to tune.
2.
The left digit of the [BANK/PATCH] indicator
shows the note which is closest to the current
pitch.
The B9.1ut incorporates a chromatic tuner and a standard type bass tuner.
This section describes how to use the tuner functions.