Filter
Top Products
8
ZOOM B9.1ut
Getting Connected
Refer to the examples shown below when making connections.
Use a shielded
mono cable to
connect the bass
guitar.
Bass guitar
Bass guitar
By connecting the USB port to a
computer, the B9.1ut can be used
as an audio interface.
Connect the optional
expression pedal (FP01/FP02).
Expression pedal
B9.1ut patch switching
and pedal operation
information can be
sent and received as
MIDI messages.
MIDI interface
Headphones
Computer
AC adapter
■ Connection example (1)
Use mono cables for connection
to bass amplifi ers. When using
only one bass amplifi er, use the
OUTPUT L/MONO jack.
Bass amplifi er
Use a mini phono plug stereo Y adapter cable to connect
a rhythm machine (ZOOM SB-246 or similar) or a CD/MD
player. The signal at the AUX IN jack is not processed by
the internal effects but supplied to the outputs as is. This
signal is also sent to the USB port.
Rhythm machine or similar
■ Connection example (2) (Using the B9.1ut as a DI)
Mixer
If the unit is connected to a mixer or to recording equipment
and input signal distortion occurs, set this switch to "-10dB".
OUTPUT GAIN switch
This switch affects only the signal at the
BALANCED OUT R connector. In the "POST"
position (switch engaged), the signal after effect
processing is output. In the "PRE" position (switch
disengaged), the signal after the accelerator but
before effect processing is output. The BALANCED
OUT L/MONO connector always carries the post-
processing signal.
PRE/POST switch
This switch affects only the BALANCED OUT R and BALANCED OUT
L/MONO connectors. In the "LIFT" position (switch engaged), the
ground pin is uncoupled from the signal path. In the "CONNECT"
position (switch disengaged), the ground pin is enabled.
GROUND switch
XLR connectors