Filter
Top Products
49
ZOOM B9.1ut
MIDI Usage Examples
● When module on/off switching is
performed
When the module is set to on, the value 127 of
the control change number is sent. When the
module is set to off, the value 0 of the control
change number is sent.
● When bypass/mute on/off switching is
performed
When bypass/mute is set to on, the value 127
of the control change number is sent. When
bypass/mute is set to off, the value 0 of the
control change number is sent.
■ Example for receiving control change
messages
(1) When a control change message
is received...
(2) The same operation as when the respectiv
e
expression pedal or switch or key at the
B9.1ut is operated occurs.
MIDI OUT
connector
MIDI IN
connector
According to the control change value received,
the B9.1ut status and parameter values change as
follows.
● When control change for built-in/
external expression pedal is received
The value of the parameter assigned to the
pedal changes according to the control change
value (0 – 127).
● When control change for module on/
off is received
If control change value is between 0 and 63, the
module is switched off. If control change value is
between 64 and 127, the module is switched on.
● When control change for bypass/mute
on/off is received
If control change value is between 0 and 63,
bypass/mute is switched off. If control change
value is between 64 and 127, bypass/mute is
switched on.
Sending pedal synth playing
information via MIDI (note
on/note off)
When the pedal synth function is enabled, foot
switch playing information can be sent as note
on/note off messages via MIDI
In manual mode or play mode,
1.
press the [SYSTEM] key.
70*2<7:LS
(*;0=,
Turn the [TYPE] knob to bring up
2.
the "NOTE ON Tx" (send note on/
note off) parameter on the display.
40+0
56;,65;_$65
[TYPE] knob
Turn parameter knob 1 to select
3.
"ON" or "OFF".
When ON was selected, playing with the pedal
synth function will result in note on/note off
messages being sent.
The pedal synth function has two operation
modes for producing sound: TG (trigger) and
HD (hold).
The differences in note on/note off sending
operation are as follows.
● TG
Note on is sent when the foot switch is
pressed and note off is sent when the foot
switch is released.
● HD
Note on is sent when the foot switch is