Filter
Top Products
66
ZOOM B9.1ut
Effect Types and Parameters
Octave
This effect adds a one-octave lower component to the original sound.
PARM1 PARM2 PARM3 PARM4
OctLevel
0 – 100
DryLevel
0 – 100
Tone
0 – 10
Level
2 – 100
Adjusts the level of the one-octave
lower sound component.
Adjusts the level of the original
sound.
Adjusts the tonal quality of the
one-octave lower sound
component.
Adjusts the signal level after
passing the module.
Tremolo
This effect periodically varies the volume level.
PARM1 PARM2 PARM3 PARM4
Depth
0 – 100
Rate
0 – 50
Wave
Up, Down,
Tri
Clip
1 – 10
Adjusts the modulation depth. Adjusts the modulation rate.
Sets the modulation waveform to
"Up" (rising sawtooth), "Down"
(falling sawtooth), or "Tri"
(triangular).
Controls the clip amount of the
modulation waveform. Higher
setting values result in stronger
clipping of the waveform tips,
giving a stronger effect.
4StagePhaser
This is a 4-stage phaser effect that produces a swooshing sound.
8StagePhaser
This is an 8-stage phaser effect that produces a swooshing sound. Compared to the 4-stage phaser, the effect sound is more detailed.
The above two effect types have the same parameters.
PARM1 PARM2 PARM3 PARM4
Position
Befr, Aftr
Rate
0 – 50
Resonance
-10 – 10
Level
2 – 100
See "A-Resonance (Auto
Resonance)" (→ p. 65).
Adjusts the modulation rate.
Adjusts the intensity of the effect
character.
Adjusts the signal level after
passing the module.
FixedPhaser
This is a fi xed phaser effect that has an equalizer-like sound.
PARM1 PARM2 PARM3 PARM4
Position
Befr, Aftr
Frequency
1 – 50
Color
1 – 4
Level
2 – 100
See "A-Resonance (Auto
Resonance)" (→ p. 65).
Adjusts the frequency to be
emphasized.
Adjusts the sound color.
Adjusts the signal level after
passing the module.
RingModulate
This effect produces a metallic ringing sound. Adjusting the "Frequency" parameter results in a drastic change of sound character
PARM1 PARM2 PARM3 PARM4
Position
Befr, Aftr
Frequency
1 – 50
Balance
0 – 100
Level
2 – 100
See "A-Resonance (Auto
Resonance)" (→ p. 65).
Adjusts the modulation frequency.
Adjusts the balance between
original sound and effect sound.
Adjusts the signal level after
passing the module.
Defret
Turns the sound from any bass guitar into a fretless bass sound.
PARM1 PARM2 PARM3 PARM4
Sense
0 – 30
Tone
1 – 50
Color
1 – 10
Level
2 – 100
Adjusts the effect sensitivity.
Adjusts the tonal quality of the
sound.
Adjusts the harmonics contents of
the sound. Higher setting values
result in stronger effect character.
Adjusts the signal level after
passing the module.
SlowAttack
This effect slows down the attack rate of the sound, resulting in a violin playing style sound.
PARM1 PARM2 PARM3 PARM4
Position
Befr, Aftr
Time
1 – 50
Curve
0 – 10
Level
2 – 100
See "A-Resonance (Auto
Resonance)" (→ p. 65).
Adjusts the rise time.
Adjusts the rising volume change
curve.
Adjusts the signal level after
passing the module.