Filter
Top Products
61
ZOOM B9.1ut
For some effect modules, you can select an
effect type from several possible choices. For
example, the MOD/EFX2 module comprises
Chorus, Flanger, and other effect types from
which you can choose one.
The fi ve-module series EXT LOOP, ZNR, PRE-
AMP, EQ, and CABINET functions as a virtual
preamplifi er.
Using the Pickup
Select function
The B9.1ut incorporates a Pickup Select function
that optimizes the signal level to match the type
of pickup in use. When starting to use the B9.1ut
or when changing the bass guitar, you should
choose a suitable pickup setting as described
below.
In manual mode or play mode,
1.
press the [SYSTEM] key.
70*2<7:LS
7(::0=,
Turn parameter knob 1 to select
2.
one of the following settings.
● PASSIVE
Select this setting if you are using a bass
guitar with an integrated passive pickup.
● ACTIVE
Select this setting if you are using a battery-
powered preamplifi er or a bass guitar with an
integrated active pickup.
When the setting is complete,
3.
press the [EXIT] key.
If the setting was changed, the indication
"Store...?" appears on the display, to allow you
to store the changes.
If the setting was not changed, the unit returns
to the previous mode.
Press the [STORE/SWAP] key to
4.
store the new setting.
If you press the [EXIT] key, the change will be
discarded and the unit returns to the previous
mode.
The patches of the B9.1ut can be thought of as ten serially linked effect modules, as shown in the
illustration below. You can use all effect modules together or selectively set certain modules to off to
use just specifi c effect modules.
Linking Effects
AutoWah
A-Resonance
AutoFilter
Octave
Tremolo
Compressor
DualComp
M Comp
Limiter
Hall
Room
Spring
Arena
TiledRoom
Delay
PingPongDly
Echo
PingPongEcho
AnalogDelay
Original
8X10 AG
4X12 SB
4X12 BM
4X10+1X15 TE
Chorus
ST-Chorus
Detune
ModDelay
Flanger
COMP WAH/EFX1 EXT LOOP MOD/EFX2 REVERBDELAYCABINET
EQ
ZNR
PRE-AMPZNR EQ
AmpegSVT
SuperBass
SWR
AmpegB15
Acoustic
Pre-amp section