Filter
Top Products
48
ZOOM B9.1ut
MIDI Usage Examples
Assign control change numbers to
4.
other operations in the same way.
When the setting is complete,
5.
press the [EXIT] key to cancel the
SYSTEM menu.
If a setting was changed, the indication
"Store...?" appears on the display, to allow you
to store the changes.
If no setting was changed, the unit returns to the
previous mode.
Press the [STORE/SWAP] key to
6.
save the changes.
The setting is accepted, and the unit returns to
manual mode or play mode.
By pressing the [EXIT] key, you can abort the
changes and return to play mode without saving.
To send and receive control
7.
change messages, connect the
B9.1ut and the other MIDI device
as follows.
■ Example for sending control change
messages
(2) Control change message is sent
(1) When the expression pedal or switches
and keys at the B9.1ut are operated...
MIDI OUT
connector
MIDI IN
connector
Control change values sent from the B9.1ut
change as follows.
● When the built-in/external expression
pedal is operated
The value of the assigned control change
number is varied continuously over the range
of 0 – 127. For the built-in expression pedal,
two control change messages can be sent
simultaneously, for vertical direction and
horizontal direction movement.
Display Control target
Default
cc#
cc# setting range
CTRL IN
Expression pedal operation 7 OFF, 1 – 5, 7 – 31, 64 – 95
PEDAL-V
Expression pedal operation, vertical direction 11 OFF, 1 – 5, 7 – 31, 64 – 95
PEDAL-H
Expression pedal operation, horizontal direction 12 OFF, 1 – 5, 7 – 31, 64 – 95
COMP
COMP module on/off 64 OFF, 64 – 95
WAH/EFX1
WAH/EFX1 module on/off 65 OFF, 64 – 95
EXT LOOP
EXT LOOP module on/off 66 OFF, 64 – 95
ZNR
ZNR module on/off 67 OFF, 64 – 95
PRE-AMP
PRE-AMP module on/off 68 OFF, 64 – 95
EQUALIZER
EQ module on/off 69 OFF, 64 – 95
CABINET
CABINET module on/off 70 OFF, 64 – 95
MOD/EFX2
MOD/EFX2 module on/off 71 OFF, 64 – 95
DELAY
DELAY module on/off 72 OFF, 64 – 95
REVERB
REVERB module on/off 73 OFF, 64 – 95
MUTE
Mute mode on/off 74 OFF, 64 – 95
BYPASS
Bypass mode on/off 75 OFF, 64 – 95