Filter
Top Products
Edition 3
Rev G
Section 4
4-45
4.1.6 RECORDERS
Recorders defines values being recorded, tags, method, source of data and chart divisions and zoning.
In the Normal Display, press the until CONFIGURATION is seen in the lower display line. If PASSWORD
appears in the lower display line, the correct "password" will need to be entered before access to Configuration is
allowed. If CONFIGURATION is not displayed, then Configuration has been disabled. Refer to Section 9,
Enables and Passwords, for instructions to enable Configuration.
With CONFIGURATION in the display, press the , then the until RECORDERS appears in the lower
display line.
1. Press the to display RECORDER NUMBER.
2. Press the to advance to the next parameter, COPY/INITIALIZE.
Choose YES if the parameters to be programmed are the same as another RECORDER already programmed.
R
E
C
O
R
D
E
R
S
Press the to change, then to
desired number, then press the .
RECORDER NUMBER
1
Selections
1 to 4
Press the to change, then to
desired choice, then press the .
Rx COPY / INITIALIZE
NO
Selections
NO YES