Filter
Top Products
182
With Macintosh
7. Press BR-900CD’s [EXIT] repeatedly to return to the
Play screen.
* If you press [EXIT] without quitting the connection to the
computer, the following screens appear. In this case, pressing
[ENTER] and then [EXIT] returns the Play screen to the
display.
fig.06-106ad
At this point, you can safely disconnect the USB cable
from the BR-900CD and the computer.
8. Press [UTILITY].
9. Press CURSOR [ ] [ ] to move the cursor to
“TONE,” and press [ENTER].
fig.03-515d
10. Press CURSOR [ ] [ ] to move the cursor to
“CARD,” and press [ENTER].
The names of the WAV and AIFF files on the memory
card are displayed.
* WAV files are indicated by the symbol “.W”; “.A” indicates
AIFF files.
fig.03-516d
11. Turn the TIME/VALUE dial to select the WAV or AIFF
file with the drum sound to be loaded.
You can preview the sound of the WAV or AIFF file to be
loaded by moving the cursor to “PVW” and pressing
[ENTER].
12. Turn the TIME/VALUE dial to specify the load-
destination song drum kit.
S1–5: Song Drum Kit 1–5
fig.03-517d
13. Turn the TIME/VALUE dial to select the load-
destination song drum sound, then press [ENTER].
The load is executed.
To cancel, press [EXIT].
fig.03-518d
* During updating, “Keep power on!” appears in the upper line
of the display, while the lower line shows what is being
processed.
* WAV and AIFF files in the TONELOAD folder are retained
without being deleted even after this procedure is completed. If
these files are no longer needed, connect the BR-900CD to
your computer via USB and use the computer to delete the
files. Any files that are retained will use the required amount
of memory on the memory card.