Filter
Top Products
105
Chapter 8 Parameters Guide
Chapter
8
This adjusts the tone as a equalizer. A parametric type is
adopted for the high-middle and low-middle range.
With FX-1 and FX-2, you can select the effect to be used from
the following. You can select the same effect for FX-1 and FX-2.
EQ (Equalizer)
Parameter/
Range
Explanation
EQ ON/OFF (Equalizer ON/OFF)
Off, On
Turns the EQ effect on/off.
Pressing [EQ] switches On and Off.
Low Cut (Low Cut Filter)
Flat,
55Hz–800Hz
This sets the frequency at which the low cut fil-
ter begins to take effect. When “Flat” is select-
ed, the low cut filter will have no effect.
Low Gain
-20–+20dB
Adjusts the low frequency range tone.
Lo-Mid f (Low Middle Frequency)
20.0Hz–10.0kHz
Specifies the center of the frequency range that
will be adjusted by the Lo-Mid G.
Lo-Mid Q (Low Middle Q)
0.5–16
Adjusts the width of the area affected by the EQ
centered at the LO-Mid f.
Higher values will narrow the area.
Lo-Mid G (Low Middle Gain)
-20–+20dB
Adjusts the low-middle frequency range tone.
Hi-Mid f (High Middle Frequency)
20.0Hz–10.0kHz
Specifies the center of the frequency range that
will be adjusted by the Hi-Mid G.
Hi-Mid Q (High Middle Q)
0.5–16
Adjusts the width of the area affected by the EQ
centered at the Hi-Mid f.
Higher values will narrow the area.
Hi-Mid G (High Middle Gain)
-20–+20dB
Adjusts the high-middle frequency range tone.
High Gain
-20–+20dB
Adjusts the high frequency range tone.
High Cut (High Cut Filter)
700Hz–11.0kHz,
Flat
This sets the frequency at which the high cut fil-
ter begins to take effect. When “Flat” is select-
ed, the high cut filter will have no effect.
Level
-20–+20dB
Adjusts the overall volume level of the equaliz-
er.
STEREO
FX-1/FX-2
FX Select
FX-1/FX-2
Common
T.WAH Touch Wah p. 106
AUTO WAH Auto Wah p. 106
SUB WAH Sub Wah p. 107
SUB COMP Sub Compressor p. 107
SUB LIMITER Sub Limiter p. 108
GRAPHIC EQ Graphic Equalizer p. 108
PARA EQ Parametric Equalizer p. 108
ENHANCER Enhancer p. 109
TONE MODIFY Tone Modify p. 109
BASS SIM. Bass Simulator p. 109
SLOW GEAR Slow Gear p. 110
DEFRETTER Defretter p. 110
BASS SYNTH Bass Synth p. 110
OCTAVE Octave p. 111
PITCH SHIFTER Pitch Shifter p. 111
HARMONIST Harmonist p. 112
SOUND HOLD Sound Hold p. 113
PHASER Phaser p. 114
FLANGER Flanger p. 114
TREMOLO Tremolo p. 115
ROTARY Rotary p. 115
UNI-V Uni-V p. 115
PAN Pan p. 115
SLICER Slicer p. 116
VIBRATO Vibrato p. 116
RING MOD. Ring Modulator p. 117
HUMANIZER Humanizer p. 117
2X2 CHORUS 2x2 Chorus p. 118
SUB DELAY Sub Delay p. 118
Parameter/
Range
Explanation
FX-1, FX-2 ON/OFF (Effect ON/OFF]
Off, On
Turns the FX-1 (FX-2) effect on/off.
Pressing [FX-1], [FX-2] switches On and
Off.
FX Select
see above
Selects the effect to be used.
STEREO
GT-10B_e.book 105 ページ ２００８年２月２６日 火曜日 午後３時３０分