Filter
Top Products
87
Chapter 6 Using the GT-10B with External MIDI Devices Connected
Chapter
6
This sets the controller number when CTL 1 and CTL 2 pedal switch operation data is output as Control Change messages.
This sets the controller number when operation data from the footswitch connected to the CTL 3,4 jack is output as Control
Change messages.
Sending CTL Pedal Operations as Control Change Messages
1.
Follow the procedure in “Making the Settings for MIDI Functions” (p. 84) to move
the cursor to “CTL1 Out” or “CTL2 Out.”
2.
Set the desired
value.
Off Control Change messages are not output.
CC#1–CC#31,
CC#64–CC#95
This sets the controller number when CTL 1 and
CTL 2 pedal operation data is output as Control
Change messages.
Sending External Footswitch Operations as Control Change Messages
1.
Follow the procedure in “Making the Settings for MIDI Functions” (p. 84) to move
the cursor to “CTL3 Out” or “CTL4 Out.”
2.
Set the desired
value.
Off Control Change messages are not output.
CC#1–CC#31,
CC#64–CC#95
This sets the controller number when external
footswitch operation data is output as Control
Change messages.
GT-10B_e.book 87 ページ ２００８年２月２６日 火曜日 午後３時３０分