Filter
Top Products
48
Chapter 4 Playing Sounds
This applies the functions of the CTL pedal, EXP Pedal and EXP PEDAL SW globally to the GT-10B.
Using Pedals to Control the Parameters
Using the CTL/EXP Pedal With the Same Functions Assigned at All
Times (Pedal Function)
1.
The SYSTEM MENU screen appears.
2.
Select CONTROL.
3.
The CONTROLLER screen appears.
4.
Select the controller whose assignment you want to change.
5.
Select Prefernc.
6.
Set the Prefernc parameter to System.
7.
Select the parameter of the chosen controller whose settings
you want to change.
8.
Change the parameter settings.
For information on what settings you can assign,
refer to “Function” (p. 138).
9.
To change another controller setting, repeat Steps 4–6.
10.
twice.
The Play screen appears.
CONTROLLER parameters are system
parameters. They are saved at the time they are
entered, and do not require a Write procedure.
SYSTEM
GT-10B_e.book 48 ページ ２００８年２月２６日 火曜日 午後３時３０分