Boss Audio Systems GT-10B Music Pedal User Manual


 
59
Chapter 4 Playing Sounds
Chapter
4
In this mode, you can record up to 38 seconds of material (recorded in mono) and repeatedly play material as a “phrase loop.” As
the loop plays, you can overdub new material if desired.
You can record a phrase loop with effects, or you can add effects after a loop has been recorded. Adding effects after-the-fact lets
you create special effects with recorded performances. It’s also a great way to audition tones, as you can adjust effect parameters
in real time while a phrase plays back.
Recorded phrases are deleted when Phrase Loop is switched off or when the power is turned off.
Recording a Phrase (REC)
Overdubbing Sound onto a Phrase (DUB)
Phrase Loop Play
What’s Phrase Loop?
Using the Phrase Loop
1.
Press [BANK
] and
[BANK
] at the same
time.
The unit goes into recording standby (The REC/DUB in-
dicator flashes).
Simultaneously pressing these a second time
stops loop playback and switches Phrase Loop
off.
You cannot carry out this procedure in Manual
mode.
2.
Recording starts. (The REC/DUB indicator lights up.)
Play the phrase you want to record.
The maximum recording time for monaural
recording is approximately 38 seconds. When the
recording time reaches 38 seconds, playback of the
recorded performance starts automatically.
3.
Recording stops. (The REC/DUB indicator goes out.)
The recorded phrase is looped (played repeatedly). (The
PLAY indicator lights up.)
1.
Follow the procedure in “Recording a Phrase (REC)” (p. 59) to record a phrase,
then perform loop play. (The PLAY indicator lights up.)
2.
Overdubbing starts. (The REC/DUB indicator lights up.)
Play the phrase you want to overdub along with the playback
of the loop.
Recording on top of an existing performance is
called “overdubbing.”
3.
Overdubbing stops. (The REC/DUB indicator goes out.)
The phrase you just recorded is combined with the phrase
you recorded first and that sound is automatically played in a
loop. (The PLAY indicator lights up.)
If you want to overdub additional material, repeat
steps 2 and 3.
PHRASE LOOP
GT-10B_e.book 59 ページ 2008年2月26日 火曜日 午後3時30分