Filter
Top Products
123
Chapter 8 Parameters Guide
Chapter
8
*1 This setting value is enabled in CTL1 Func and CTL2 Func.
WAH
You can control the wah effect in real time by adjusting the
EXP Pedal or expression pedal connected to the EXP PEDAL 2
jack.
“Setting CTL/EXP Functions Individually in Each Patch (PEDAL FX)” (p. 49)
EXP1 Func (EXP Pedal Function)
Off
The function is not assign to the controller.
Foot Volume Controls the Foot Volume.
Pedal Bend Controls the Pedal Bend.
WAH Controls the WAH.
PB/FV Controls the Pedal Bend or Foot Volume.
WAH/FV Controls the WAH or Foot Volume.
Parameter/
Range
Explanation
Parameter/
Range
Explanation
Type
This selects the wah type.
CRY WAH
This models the sound of the CRY BABY wah
pedal popular in the ’70s.
VO WAH This models the sound of the VOX V846.
Bass WAH
This wah has been specially adapted for use in
the bass registers.
Inclusion of the low-frequency range in the
wah sound produces a robust wah effect, with
no dilution of the sound.
Reso WAH
This completely original effect offers enhance-
ments on the characteristic resonances pro-
duced by analog synth filters.
Custom
Custom wah
You can customize it however you like to
match the sound you want.
Pdl Pos. (Pedal Position)
0–100
Adjusts the position of the wah pedal.
This parameter is used after it’s been assigned to an
EXP Pedal or similar controller.
Pedal Min (Pedal Minimum)
0–100
Selects the tone produced when the heel of the
EXP Pedal is depressed.
Pedal Max (Pedal Maximum)
0–100
Selects the tone produced when the toe of the
EXP Pedal is depressed.
EffectLev (Effect Level)
0–100
Adjusts the volume of the wah sound.
DirectLev (Direct Level)
0–100
Adjusts the volume of the direct sound.
MONO
GT-10B_e.book 123 ページ ２００８年２月２６日 火曜日 午後３時３０分