Filter
Top Products
36
Chapter 2 Creating Sounds (Patch Edit)
Each effect comprises several different kinds of parameters. You can more precisely create the sounds you want by editing each of
these parameters individually.
Adjusting the Parameters
1.
The setting screen for the effects appears.
• With [FX-1] and [FX-2], the settings for the
currently selected effect are shown.
• Pressing [MASTER/PEDAL FX] displays the
MST/PDL FX screen.
2.
Make the settings for the parameters.
Some effects include multiple pages for the
parameter settings. You can use [ ] and
[ ] to switch the pages.
3.
To adjust another effect parameter, repeat Steps 1 and 2.
• If you want to name the patch or edit the name,
proceed to “Naming a Patch (PATCH NAME)”
(p. 42) before you save.
• If you want to save a tone with the settings
you’ve made, proceed as described in “Saving
a Patch (PATCH WRITE)” (p. 43).
Operations Using the PARAMETER Knobs
In the effects screens, the knobs correspond to the displayed parameters.
GT-10B_e.book 36 ページ ２００８年２月２６日 火曜日 午後３時３０分