Filter
Top Products
96
Chapter 7 Using the GT-10B Connected to a Computer Via USB
The following section describes the GT-10B’s USB-related functions.
Make these settings in accordance with how you plan to use the GT-10B.
This lets you adjust the volume level of the digital audio signals output from the GT-10B and adjust the amount of digital audio
from USB (computer) to be mixed in.
Setting the USB Functions
Setting the Digital Audio Signal Input and Output
1.
The SYSTEM MENU screen appears.
2.
Select INPUT/OUTPUT.
3.
The INPUT/OUTPUT screen appears.
4.
Select the TOTAL (page 3) screen.
5.
Move the cursor to USB/DGT Out Lev or USB Mix Level.
6.
Adjust the parameters.
Parameter
Explanation
USB/DGT Out Lev
Adjusts the volume level of the digital audio signals output to the USB (Computer) and DIGITAL OUT connectors.
USB Mix Level
Sets the volume level of the mixed digital audio signals from USB (Computer) when INPUT SELECT (p. 63) is set
to “Bass 1–3.”
SYSTEM
GT-10B_e.book 96 ページ ２００８年２月２６日 火曜日 午後３時３０分