Filter
Top Products
43
Chapter
3
Chapter 3 Saving a Tone
If you want to save the changes in the settings, carry out the Write procedure.
The patch previously stored at the write destination will be lost once the write is executed.
You can copy a Preset or User patch to another User patch.
The patch previously stored at the write destination will be lost once the write is executed.
Saving a Patch (PATCH WRITE)
1.
The PATCH WRITE screen appears.
When no edits have been made to the currently
selected patch, the PATCH COPY screen is
displayed.
2.
Select the write-destination User patch.
To cancel the Write procedure, press [EXIT]. The
Play screen returns to the display.
You can also use the procedure described in
“Using the Pedal to Select the Patch” (p. 31) to
select the write-destination.
3.
The GT-10B saves the changes in the settings to the write-destination
patch.
If you want to name the patch or edit the name,
proceed to “Naming a Patch (PATCH NAME)” (p.
42) before you save.
Copying Patches (PATCH COPY)
1.
Select the patch you wish to copy.
“Selecting a Tone (Patch Change)” (p. 30)
2.
The PATCH COPY screen appears.
When edits have been made to the currently
selected patch, the PATCH WRITE screen is
displayed.
3.
Select the copy-destination User patch.
To cancel the Copy procedure, press [EXIT]. The
Play screen returns to the display.
You can also use the procedure described in
“Using the Pedal to Select the Patch” (p. 31) to
select the copy destination.
4.
The GT-10B copies the patch selected in Step 1 to the copy-destination
patch.
GT-10B_e.book 43 ページ ２００８年２月２６日 火曜日 午後３時３０分