Filter
Top Products
64
Chapter 5 Making Global Settings
The GT-10B includes a feature that allows you to change the overall tone of all patches. This is called the “Global function.”
With the Global function, you can change your settings to match those of your equipment and the operating environment, while
leaving the settings in the patches untouched.
This adjusts the tone of the OUTPUT regardless of the equalizer on/off settings of individual patches.
Adjusting the Overall Sound to Match the Usage
Environment (Global)
Adjusting the Overall Tone (
Global EQ)
1.
The SYSTEM MENU screen appears.
2.
Select INPUT/OUTPUT.
3.
The INPUT/OUTPUT screen appears.
4.
Select the GLOBAL EQ (page 2) screen.
5.
Move the cursor to the parameter you want to set.
6.
Adjust the parameter.
For information on the parameters, refer to
“GLOBAL EQ” (p. 134).
Parameter
Explanation
Low Gain
Adjusts the low frequency range tone.
Mid Gain (Middle Gain) Adjusts the middle frequency range tone.
Mid Freq (Middle Frequency) Specifies the center of the frequency range that will be adjusted by the Mid Gain.
Mid Q (Middle Q)
Adjusts the width of the area affected by the EQ centered at the Mid Freq.
Higher values will narrow the area.
High Gain Adjusts the high frequency range tone.
SYSTEM
GT-10B_e.book 64 ページ ２００８年２月２６日 火曜日 午後３時３０分