Filter
Top Products
65
Chapter 5 Making Global Settings
Chapter
5
This controls the overall threshold value for the noise suppressor settings in the individual patches. This is an effective tool when
basses are changed during performances and for making adjustments in response to noise levels at the performance venue.
This is an overall setting and does not alter the individual patch settings.
This has no effect on patches in which the noise suppressor is turned off.
Controlling the Overall Effect of the Noise Suppressor (Total Noise Suppressor)
1.
The SYSTEM MENU screen appears.
2.
Select INPUT/OUTPUT.
3.
The INPUT/OUTPUT screen appears.
4.
Select the TOTAL (page 3) screen.
5.
Move the cursor to NS Threshold.
6.
Adjust the threshold level of the Noise Suppressor.
Set to “0 dB” when using this in individual patch
settings.
For information on the parameters, refer to “NS
Threshold (Noise Suppressor Threshold)” (p. 135).
SYSTEM
GT-10B_e.book 65 ページ ２００８年２月２６日 火曜日 午後３時３０分