Filter
Top Products
61
Chapter 4 Playing Sounds
Chapter
4
Parameter/
Range
Explanation
Mode
Performance
This records the sound after it passes through the
effects.
This lets you achieve a rich variety of performances
by combining different tones.
Patch Edit
This records the sound before it passes through the
effects, and applies the effects during loop play.
This enables you to adjust effects or compare patch
tones.
Pdl Mode (Pedal Mode)
Off
The BANK pedals are not used for operation of the Phrase Loop feature. These are used as bank switch pedals.
Phrase Loop can be controlled by assigning the Phrase Loop feature to any of the CTL pedals 1 through 4 etc. and maintaining the
BANK pedals’ bank switching function.
On The BANK pedals are used for operation of the Phrase Loop feature.
Rec Mode (Recording Mode)
Mono Phrases are recorded in mono (max. 38 seconds).
Stereo
Phrases are recorded in stereo (max. 19 seconds).
Play Lev (Play Level)
0–120
Sets the phrase playback volume.
Clear Pdl (Clear Pedal Function)
Clear Only
When you press [BANK
▲
] while the Phrase Loop feature is on, the recorded data is cleared and then
GT-10B switches to STANDBY mode.
Mute/Clear
When you press [BANK
▲
] while the Phrase Loop feature is on, the performance of the recorded phrase is muted (the
recorded data is not erased).
If you then press [BANK
▲
] again while the phrase is muted, the recorded data is cleared and then GT-10B switches
to STANDBY mode.
Effector
FX
Phrase
Loop
When the Mode is
set to the Patch Edit.
When the Mode is
set to the Performance.
Phrase
Loop
GT-10B_e.book 61 ページ ２００８年２月２６日 火曜日 午後３時３０分