Filter
Top Products
20
Introducing the R-4 Pro
The Main screen
The R-4 Pro Main screen displays information about the project and the operational status of the R-4 Pro.
You can press the [DISPLAY] button to switch the contents of the display.
* For an explanation of the other displays, refer to “While playing or stopped” (p. 18).
From the Main screen, you can press the [DISPLAY] button to change the recordable time display to the
remaining hard disk capacity display.
While recording
Time counter
ABS
Displays the time elapsed from the beginning of the project to the current po-
sition (absolute time) in hours:minutes:seconds:frames format.
LTC
Displays the timecode (p. 84) for the current position in hours: minutes:sec-
onds: frames format.
Recordable time Displays the time that recording can take place.
Total recording time
Displays the total time from the beginning of recording to the current location.
* Even if you record continuously, another new project will be created
automatically when the project reaches 2 GB in size, and recording will
continue. Even for recordings spanning multiple projects, the elapsed time
since you first pressed the [REC] (record) button is shown here.
Remaining hard disk capacity Displays the amount of free memory on the internal hard disk.
Total recording time
Time counter
Recordable time
Remaining hard disk capacity
R-4_e_new.book 20 ページ ２００６年１１月２０日 月曜日 午後１時９分