Filter
Top Products
69
System setup
fig.hd-uti1.eps
1
Press the R-4 Pro [SYSTEM] button.
The System Menu screen is shown in the display.
fig.hd-uti2.eps
2
Use the [CURSOR] buttons to select 9 HDD Utility, and
press the [ENTER] button.
The HDD Utility screen is shown.
* If you decide to cancel, press the [EXIT] button.
format
3
Use the [CURSOR] buttons to select either “Format” or
“Check,” and press the [ENTER] button.
fig.hd-uti3.eps
4
The display displays the “Are you sure?” confirmation
message. Use the [CURSOR] buttons to select “Yes” if
you are sure you want to execute or “No” if you decide to
cancel without executing.
Then press the [ENTER] button.
fig.hd-uti4.eps
The message shown at right is shown during processing.
Do not turn off the power during processing.
When processing has completed, you will automatically return to
the System Menu screen.
5
Press the [EXIT] button once again to return to the Main
screen.
If you want to make other system related settings, use the [CURSOR] buttons to select the desired menu item.
Using the HDD Utility
R-4_e_new.book 69 ページ ２００６年１１月２０日 月曜日 午後１時９分