Edirol R-4Pro Musical Instrument User Manual


 
73
System setup
Rec Mode
MONOx1
One-channel recording to
one monaural file
This selects the structure of the project file that is
created during recording. A monaural WAV file
will be created for each channel. Choose these
settings if you are using a separate mic for the vo-
cal and performance or each speaker in a conver-
sation, so that a separate file is created for each
channel. These settings create monaural WAV
files. If Input Select is set to Analog, you can cre-
ate up to four monaural files. If Input Select is set
to IntMic or Digital, you can create up to two
monaural files.
* You cannot select MONO x3, MONO x4, or
STEREO x2 if Input Select is set to IntMic or
Digital.
* You cannot select MONO x3 or MONO x4 if
Rec Freq. is set to 88.2kHz, 96 kHz, or
192kHz.
MONOx2
Two-channel recording to
two monaural files
MONOx3
Three-channel recording to
three monaural files
MONOx4
Four-channel recording to
four monaural files
STEREOx1
Two-channel recording to
one stereo file
Two channels are recorded as L and R to create a
stereo WAV file.
If Input Select is set to Analog, one stereo WAV
file with channel 1 as L and channel 2 as R is cre-
ated. The inputs to channels 3 and 4 are ignored.
If Input Select is set to IntMic or Digital, one ste-
reo WAV file is created.
STEREOx2
Four-channel recording to
two stereo files
If Input Select is set to Analog, a stereo file with
channel 1 as L and channel 2 as R is created, and
another stereo file with channel 3 as L and chan-
nel 4 as R is also created.
*When Input Select is set to either IntMic or
Digital or when Rec Freq. is set to 192 kHz,
STEREO x 2 cannot be selected.
4CHx1
Four-channel recording to
one four-channel file
Channels 1–4 will be recorded as a single WAV
file. Be aware that not all computer software can
handle four-channel WAV files.
*When Input Select is set to either IntMic or
Digital or when Rec Freq. is set to 192 kHz,
4CH x 1 cannot be selected.
* Cannot be used if Input Select is set to IntMic or Digital.
Menu item Value Function
MONOx1 MONOx2 MONOx3 MONOx4 STEREOx1 STEREOx2 4CHx1
44.1kHz
48kHz
88.2kHz
96kHz
192kHz
R-4_e_new.book 73 ページ 2006年11月20日 月曜日 午後1時9分