Filter
Top Products
70
System setup
fig.hd-uti1.eps
1
Press the R-4 Pro [SYSTEM] button.
The System Menu screen is shown in the display.
fig.hd-uti2.eps
2
Use the [CURSOR] buttons to select 10 USB Storage
Utility
, and press the [ENTER] button.
When the connection to an external memory device is not
mounted, the USB Storage Utility starts as shown in the
figure to the right.
* A connected external memory device cannot not be loaded if it is not
mounted.
format
hd-uti2.eps
When the connection to an external memory device is mounted,
the USB Storage Utility starts as shown in the figure to the right.
* If you decide to cancel, press the [EXIT] button.
format
fig.NO-CF.eps
* If no external memory device is inserted, the message shown at right is
shown.
3
Select one of the following with the [CURSOR] button and
select by pressing the [ENTER] button.
fig.hd-uti3.eps
4
The display displays the “Are you sure?” confirmation
message. Use the [CURSOR] buttons to select “Yes” if
you are sure you want to execute or “No” if you decide to
cancel without executing.
Then press the [ENTER] button.
fig.hd-uti4.eps
The message shown at right is shown during processing.
Do not turn off the power during processing.
When processing has completed, you will automatically return to
the System Menu screen.
5
Press the [EXIT] button once again to return to the Main
screen.
If you want to make other system related settings, use the [CURSOR] buttons to select the desired menu item.
Using the USB Storage Utility
when not mounted Moun Format
when mounted Unmount Format Check
R-4_e_new.book 70 ページ ２００６年１１月２０日 月曜日 午後１時９分