Filter
Top Products
46
Finder functions
fig.finder-1.eps
1
While the Main screen is shown in the display, press the
[ENTER/FINDER] button. The Finder screen shown in
the figure is displayed.
Projects are shown in descending alphabetical order.
fig.finder-select.eps
2
In the Finder screen, use the [CURSOR] up/down
buttons or the [SCRUB] dial to select the project you
want to rename. Then press the [ENTER] button.
If the desired project is in a folder, the hard disk (HD), or the external memory device (EX), you
can press the [CURSOR] right button to move into the selected folder (i.e., move to a lower-
level folder). If you want to move back to the upper-level folder, press the [CURSOR] left
button.
fig.finder-cf.eps
* If you want to select the external memory device, select the hard disk
(HD) and then press the [CURSOR] left button to show the
external memory device (EX). However, if the external memory device
is not mounted, it will not be displayed. See Connection and
removal (p. 79)
* Press the [CURSOR] right button after selecting EX to reference
the external memory device contents.
fig.finder-rename1.eps
3
When the screen shown in the figure is displayed, use the
[CURSOR] buttons to choose
3 Rename.
fig.finder-rename2.eps
4
Use the [CURSOR] left/right buttons to move the
cursor through the characters of the project name or folder
name shown in the display. Place the cursor on the
character that you want to change, and then use the
[CURSOR] up/down buttons or the [SCRUB/VALUE]
dial to change the character.
Use the [CLEAR] button to delete a character and the [Mark] button to insert a character. Use these
buttons to edit the name as desired.
When finished editing the name, press the [ENTER] button.
* If you decide to cancel without renaming, press the [EXIT] button before you press the [ENTER] button.
fig.finder-rename3.eps
Do not turn off the power while a project is being renamed.
Renaming a project (Rename)
R-4_e_new.book 46 ページ ２００６年１１月２０日 月曜日 午後１時９分