Filter
Top Products
66
System setup
fig.recording-1.eps
1
Press the R-4 Pro [SYSTEM] button.
The System Menu screen is shown in the display.
fig.recording-2.eps
2
Use the [CURSOR] buttons to select 6 Timecode, and
press the [ENTER] button.
The Recording Setup screen is shown.
fig.recording-2.eps
3
Use the [CURSOR] buttons to select 1 Setup, and press
the [ENTER] button.
The Recording Setup screen is shown.
fig.recording-3.eps
4
Use the [SCRUB/VALUE] dial to select the Mode value.
The setting is applied as soon as you select it.
You do not need to press the [ENTER] button.
fig.recording-3.eps
5
Use the [CURSOR] buttons to select the Frame Rate.
6
Use the [SCRUB/VALUE] dial to select the Frame Rate value.
7
In the same way, use the [CURSOR] buttons and the [SCRUB/VALUE] dial to choose and set the
remaining items.
8
When finished making settings, press the [EXIT] button twice.
You are returned to the System Menu screen.
9
Press the [EXIT] button once again to return to the Main screen.
If you want to make other system related settings, use the [CURSOR] buttons to select the desired menu item.
* Please set Pre Recording to OFF when recording using timecode. If Pre Recording is set, then the timecode will not
match.
*If the [PAUSE] button is pressed during recording, the timecode will not match during playback. Please exercise
caution.
Timecode settings
R-4_e_new.book 66 ページ ２００６年１１月２０日 月曜日 午後１時９分