Filter
Top Products
38
Playing back
The following describes how to connect devices with digital input ports, such as mixers, speakers, or
recording devices.
fig.basic-disp.eps
The sampling frequency of the project playing back will be the
sampling frequency of the audio output from the digital output
connector.
1. Switch off the power to the R-4 Pro.
2. Turn off power to the device with the digital input port.
3. Connect the R-4 Pro digital output connector [DIGITAL OUT] to the digital
input connector of the device with digital input.
* You will need a separately available XLR type cable (not included) to connect your digital device to the R-4 Pro digital
output connector.
4. Switch on the R-4 Pro power.
5. Turn on power to the device with the digital input port.
* You cannot adjust the volume of the R-4 Pro digital audio signal.
Connecting a device having a digital input port
(digital connection: R-4 Pro digital output connector)
R-4_e_new.book 38 ページ ２００６年１１月２０日 月曜日 午後１時９分