Filter
Top Products
30
Recording
The following describes how to record audio from a mic connected to a R-4 Pro XLR input connector.
fig.mic-1.eps
● Connections
Connect your mic to a XLR input connector.
Howling could be produced depending on the location of microphones relative to speakers. This can be
remedied by:
1. Changing the orientation of the microphone(s).
2. Relocating microphone(s) at a greater distance from speakers.
3. Lowering volume levels.
● Phantom power switch
Turn this ON when connecting a phantom-powered condenser mic.
fig.input-analog.eps
● System settings
Press the R-4 Pro [SYSTEM] button.
In 1 Recording Setup, set Input Select to Analog.
Set the other items in 1 Recording Setup as appropriate for the
recording you want to make.
* For more about system settings, refer to “System setup” (p. 64).
● Limiter
Turn this ON if you want to prevent unexpectedly loud sounds or strong attacks from producing clipped
noise.
The limiter threshold is -10 dB relative to digital full scale.
The limiter can group and link each channel. See Limiter link (p. 74).
Recording from a connected mic
Turn this ON
if you're using a
condenser mic.
Adjust the input LEVEL
and SENS
R-4_e_new.book 30 ページ ２００６年１１月２０日 月曜日 午後１時９分